holden.wiki

• MODEL SELECTION INDEX
• MY 2004 VY Series AWD - Service Information
• Section 6C3-2A Powertrain Management – Diagnostic Tables - GEN III V8 Engine
  • 1 Introduction
    • 1.1 Engine Diagnostic Trouble Codes (DTC)
    • 1.2 PIM Diagnostic Trouble Codes (DTC)
    • 1.3 Automatic Transmission Diagnostic Trouble Codes (DTC)
    • 1.4 PIM Connector – A5
    • 1.5 PIM Connector Terminal Definitions
  • 2 General Diagnostic Tables
    • 2.1 On-Board Diagnostic (OBD) System Check
      • Circuit Description
      • Diagnostic Aids
      • Test Description
      • On-Board Diagnostic System Check – Diagnostic Table
    • 2.1 Data Link Connector Diagnosis
      • Circuit Description
      • Diagnostic Aids
      • Test Description
      • Data Link Connector – Diagnostic Table
  • 3 Diagnostic Trouble Code Tables
    • DTC P0481 – Cooling Fan High Speed Relay Control
      • Circuit Description
      • Conditions for Running the DTC
      • Conditions for Setting the DTC
      • Action Taken When the DTC Sets
      • Conditions for Clearing the MIL/DTC
      • Diagnostic Aids
      • Test Description
      • P0481 – Cooling Fan High Speed Relay Control – Diagnostic Table
    • DTC U1000 – No Class 2 Serial Data
      • Circuit Description
      • Conditions for Running the DTC
      • Conditions for Setting the DTC
      • Action Taken When the DTC Sets
      • Conditions for Clearing the DTC
      • Diagnostic Aids
      • Test Description
      • DTC U1000 – No Class 2 Serial Data – Diagnostic Table
    • DTC U1001 – No Serial Data from PCM
      • Circuit Description
      • Conditions for Running the DTC
      • Conditions for Setting the DTC
      • Action Taken When the DTC Sets
      • Conditions for Clearing the MIL/DTC
      • Diagnostic Aids
      • Test Description
      • DTC U1001 – No Serial Data from the PCM – Diagnostic Table
    • DTC U1043 – No Serial Data from ABS-TC
      • Circuit Description
      • Conditions for Running the DTC
      • Conditions for Setting the DTC
      • Action Taken When the DTC Sets
      • Conditions for Clearing the MIL/DTC
      • Diagnostic Aids
      • Test Description
      • DTC U1043 – No Serial Data from ABS-TC – Diagnostic Table
    • DTC U1064 – No Serial Data from BCM
      • Circuit Description
      • Conditions for Running the DTC
      • Conditions for Setting the DTC
      • Action Taken When the DTC Sets
      • Conditions for Clearing the DTC
      • Diagnostic Aids
      • Test Description
      • DTC U1064– No Serial Data from BCM – Diagnostic Table
    • DTC B1009 – EEPROM Checksum Error
      • Circuit Description
      • Conditions for Running the DTC
      • Conditions for Setting the DTC
      • Action Taken When the DTC Sets
      • Conditions for Clearing the DTC
      • Diagnostic Aids
      • Test Description
      • DTC B1009 – EEPROM Checksum Error– Diagnostic Table
    • DTC B3027 – Starter Enable Circuit Range / Performance
      • Circuit Description
      • Conditions for Running the DTC
      • Conditions for Setting the DTC
      • Action Taken When the DTC Sets
      • Conditions for Clearing the DTC
      • Diagnostic Aids
      • Test Description
      • DTC B3027– Starter Relay Circuit Range/Performance – Diagnostic Table